The double wire hose clamp remains the same as the strong hose clamp, they both use the triangular thread transmission principle of screws and nuts, and the material selection of the double wire clamps is stricter. Stainless steel wire hose clamps are available in a variety of colors and sizes for you to choose from.
$0.01 – $0.05
The biggest difference between the double wire hose clamp and other hose clamps is that two steel wires are used as the fastening carrier, and the steel wires are used to fasten the smaller load-carrying area, which can concentrate the pressure on one working surface. So as to make the logistics more firmly bound.btektech Dual Wire Hose Clamps are ideal for soft and semi-rigid hoses with helical or braided reinforcement; and foil pipes. Made of high-quality galvanized steel.
| Range(mm) | Range(Inch) | Wire Diameter(mm) | Screw Size(mm) | Load Torque(N) |
|---|---|---|---|---|
| 8-12 | 0.31″-0.47″ | 1.5 | M5*35 | 5-7Nm |
| 11-14 | 0.43″-0.55″ | 1.5 | M5*35 | 5-7Nm |
| 13-16 | 0.51″-0.63″ | 1.5 | M5*35 | 5-7Nm |
| 15-18 | 0.59″-0.71″ | 1.5 | M5*35 | 5-7Nm |
| 17-20 | 0.67″-0.79″ | 1.8 | M5*35 | 5-7Nm |
| 19-22 | 0.75″-0.87″ | 1.8 | M5*35 | 5-7Nm |
| 20-24 | 0.79″-0.94″ | 1.8 | M5*35 | 5-7Nm |
| 22-26 | 0.87″-1.02″ | 1.8 | M5*35 | 5-7Nm |
| 24-28 | 0.94″-1.1″ | 1.8 | M5*35 | 5-7Nm |
| 26-30 | 1.02″-1.18 | 2 | N6*40 | 5-7Nm |
| 28-32 | 1.1″-1.26″ | 2 | N6*40 | 5-7Nm |
| 31-35 | 1.22″-1.38″ | 2 | N6*40 | 5-7Nm |
| 34-38 | 1.34″-1.5″ | 2 | M6*50 | 5-7Nm |
| 35-40 | 1.38″-1.57″ | 2.5 | M6*50 | 5-7Nm |
| 37-42 | 1.46″-1.65″ | 2.5 | M6*50 | 5-7Nm |
| 40-45 | 1.57″-1.77″ | 2.5 | M6*50 | 5-7Nm |
| 43-48 | 1.69″-1.89″ | 2.5 | M6*50 | 5-7Nm |
| 45-50 | 1.77″-1.97″ | 2.5 | M6*50 | 5-7Nm |
| 47-52 | 1.85″-2.05″ | 2.5 | M6*50 | 5-7Nm |
| 50-55 | 1.97″-2.17″ | 2.5 | M6*50 | 5-7Nm |
| 53-58 | 2.09″-2.28“ | 2.5 | M6*50 | 5-7Nm |
| 55-60 | 2.17″-2.36″ | 2.5 | M6*60 | 5-7Nm |
| 54-62 | 2.13″-2.44″ | 2.5 | M6*60 | 5-7Nm |
| 60-65 | 2.36″-2.56″ | 2.5 | M6*60 | 5-7Nm |
| 63-68 | 2.48″-2.68″ | 3 | M6*60 | 5-7Nm |
| 65-70 | 2.56″-2.76″ | 3 | M6*60 | 5-7Nm |
| 70-75 | 2.76″-2.95″ | 3 | M6*60 | 5-7Nm |
| 75-80 | 2.95″-3.15″ | 3 | M6*60 | 5-7Nm |
| 80-85 | 3.15″-3.35″ | 3 | M6*60 | 5-7Nm |
| 84-90 | 3.31″-3.54″ | 3 | M6*60 | 5-7Nm |
| 89-95 | 3.5″-3.74″ | 3 | M6*60 | 5-7Nm |
| 94-100 | 3.7″-3.94″ | 3 | M6*60 | 5-7Nm |
| 98-105 | 4.06″-4.33″ | 3 | M6*60 | 5-7Nm |
New Address: Room 1305,
Tiandu Building,
No. 211 Changjiang Road,
Huqiu District,
Suzhou, Jiangsu,
China
Old Address: Room 1206,
Jinhe International Building,
No. 35 Shishan Road,
Huqiu District,
Suzhou, Jiangsu,
China
Tel: +8618706202541
Emails: info@btektech.com
CONTACT
