btektech

Suck Back Dispensing Valves

The Suck Back type dispensing valve has the characteristics of clean glue breaking, no wire drawing, no glue dropping, and corrosion resistance.

$69.00

DESCRIPTION

The back suction dispensing valve gives the solenoid valve a signal, so as to drive the dispensing valve piston to move down. The glue passes through the cylinder, and the glue is pressed out from the needle, so that the glue stops instantly and the glue is sucked off, and the residual glue on the needle head is reduced. The body of the suck back dispensing valve is anodized by aluminum alloy, and the contact colloid part is corrosion-resistant material.

Suck Back Dispensing Valve’s Parameters
Part No JF001 JF003 HMJQ-52 YK-28 YK-38
Structure Suck Back Compound action back suction type Suck Back Plunger back suction type Suck Back
Pressure 4-7KGF/CM 4-7KGF/CM 4-7KGF/CM 4-7KGF/CM 4-7KGF/CM
Minimum quantity 0.01ml 0.01ml 0.01ml 0.01ml 0.001ml
Viscosity 1-1000000CPS 1-1000000CPS 1-1000000CPS 1-1000000CPS 1-300000CPS
Inlet pressure <30KG <30KG <10KG <30KG <10KG
Inlet outlet Size 1/8″NPT(F) 1/4 NPT(F) 1/8″NPT(F) 1/8″NPT(F) 1/4 NPT Internal thread
Control Method <600/MIN <600/MIN <600/MIN <600/MIN <600/MIN
Weight 310g 500g 290g 290g 180g
Outer diameter (D)26*(H)140(g) (D)32*42*(H)140 Square (D)30*(H)170 ф30*149MM
The main material Aluminum alloy anodized/stainless steel Aluminum alloy (sandblasted + anodized) SU304, Aluminium alloy anode Anodized stainless steel and aluminum alloy Polyformaldehyde, fluoroplastics, stainless steel

RELATED PRODUCTS

Contact Us

If you have any product or other information you need to know, you can email us through the contact form below or call us by phone.

 

 

Suzhou Baotailong Electronic Materials Co., Ltd.

Address: Room 1206,
Jinhe International Building,
No. 35 Shishan Road,
Huqiu District,
Suzhou, Jiangsu,
China

Tel: +8618706202541

Emails: rita@btektech.com